CAB EOS1 Configuration Manual page 16

16 4 Configuration
4.1.5 Status Line
Select the parameters (widgets) to be displayed in Ready mode.
 Start Offline menu.
 Select Setup > Status line.
 Activate the desired widgets.
Notice!
i
Because of the limited width of the display it is not possible to display all widgets simultaneously.
Widget
Clock
Date sheet
Date/time
digital
Temperature
Ribbon supply
Cutter
Ethernet Status
WLAN
Bluetooth
Data transfer
Table 6
4.1.6 Security
By activating a PIN, the Setup menu, certain storage device functions and the firmware update can be protected
from unauthorized access.
The protected menu items are then only accessible after the PIN is entered.
 Start Offline menu.
 Select Setup > Security.
Parameter
Security
PIN
Table 7
Meaning
Displays the current time.
Displays the current calendar day.
Digital display of current date and time
Displays the current printhead temperature.
Displays the current ribbon supply in the form of a horizontal bar.
Displays a cutter connected
Displays the Ethernet status
Displays the WLAN status
- grey symbol if WLAN adapter is installed
- black symbol if WLAN adapter is connected to an Access Point
Displays the Bluetooth status
- grey symbol if Bluetooth adapter is installed
- black symbol if Bluetooth connection is active (paired, serial port open)
Displays the current data transfer in the form of a falling drop.
Parameters of the menu Setup > Status line
Meaning
Status of the PIN activation
Setting of the PIN
Parameters of the menu Setup > Security
16
Default
On
On
Off
Off
Off
On
Off
Off
Off
On
Default
Off
0000