Configuration Of Printer Settings - CAB MACH2 Operator's Manual

5 Installing Software and Configuring the Printer
Configuration of Printer Settings
5.3
The Software Tool Mach1/2-Load
i
Note!
The software tool Mach1/2-Load is used to manage the printer settings and the configuration of the
interfaces.
Starting the Tool Mach1/2-Load
 Insert the Product DVD in the DVD drive of the host computer.
 Start the Tool Mach1/2-Load by a double click
Printer Configuration
This tab allows you to configure and edit the settings of the connected printer.
Almost all important settings of the printer can be configured here.
 Click "GET" to load the settings from the printer,
 Click "SET" to send the settings to the printer. When you send only the slected parameters are transmitted.
Under "File" you can save the settings in a configuration File, respectively load the settings from a file.
19