Engine Access Covers - Rear - Winnebago Solei User Manual

Table of Contents

Advertisement

SECTION 3 –
DRIVING YOUR MOTORHOME
rear cargo compartment on the driver side of the
coach. When plugged into the receptacle, the
heater is connected to both the shoreline and the
auxiliary generator, so a separate extension cord
is not needed. The power switch is located near
the monitor panel.
Diesel Engine Heater Switch
(Located near monitor panel)
-Typical View
REMEMBER! Turn the Diesel Engine Heater
switch OFF after starting the engine. The heater
will keep operating for as long as it is supplied
with electricity. If the switch is left on, the engine
heater will come on each time you hook up the
shoreline cord or start the generator. The block
heater can be damaged if left on for an extended
period of time.
ENGINE ACCESS COVERS –
REAR
The Engine Access covers are located beneath
the rear bed board (Model 34T) and beneath rear
bath floor (Model 38R). It is only removed if a
complete view of the engine is needed for
inspection, or for replacement or adjustment of
upper engine parts.
Take precautions to protect carpet and interior
furnishings when removing engine covers. The
underside of the engine cover could contain
deposits of oil and fuel or other engine fluids and
substances that could damage fabrics and interior
furnishings.
3-16
Model 34T
Forward Engine Access Cover
The Forward Engine Access Cover is
accessed by lifting the foot of the bed board.
1. Lift the bed board.
2. Remove screws around perimeter of plywood
engine cover panel.
• Forward Engine
Access Cover
3. Remove Forward Engine Access Cover and
set aside.
• Remove Forward Engine
Access Cover
4. Reverse steps to reinstall engine access cover.
Rearward Engine Access Cover
In some cases, you may need further access of
the engine (beyond removing the Forward
Engine Access Cover, as previously described.)
The Rearward Engine Access Cover is accessed
by removing the screws at the head of the bed
board and setting the bed board aside.
If you have a standard mattress, skip steps 1-4
and go to step 5.
1. Lift the bed board.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forza

Table of Contents