Power Roof Ventilator - Winnebago Solei User Manual

-Typical View
-Typical View

POWER ROOF VENTILATOR

–If Equipped
The vent dome is raised and lowered using the
Dome Crank knob on the fan.
The turbine fan will start automatically as the
vent is raised, and stop as the vent is lowered.
Dome Crank
Fuse
Knob
Power Roof Ventilator
To Operate Ceiling Ventilator
1. Turn the Dome Crank Knob to raise the dome
about 3" or more to allow the turbine fan to
operate. (A built-in safety switch will not let
the fan motor run unless the dome is partially
open).
2. The turbine fan will start automatically as the
vent dome is raised and stop as the vent dome
is lowered and closed. (Fan Speed knob must
be in a position other than 0-Off).
3. Turn the Fan Speed knob to the desired level
(1-Low, 2-Med, 3-Hi).
4. Open a window or door to provide airflow.
Direction of airflow is determined by which
window or door is opened.
NOTE: For best results, close all other roof
vents, windows, and doors, then open
one (1) window the farthest distance
from the roof ventilator.The fan speed
selector on the fan allows you to adjust
the amount of circulation you need at any
time.
5. If you want the vent dome raised without the
fan running, turn the Fan Speed knob to 0-Off .
SECTION 12 –
MISCELLANEOUS
Fan Speed
Selector
12-13