Radio In-Dash/Rearview Monitor System - Winnebago Solei User Manual

Radio Remote Control
A hand-held remote control for the radio lets
you control the radio from a distance for your
convenience. The remote control is included in
your InfoCase.
Radio Power Switch
The Radio Power switch lets you connect the
dash radio to the coach batteries with the ignition
switch turned off for listening while parked. This
prevents accidental draining of the chassis
battery with prolonged use of the radio.
NOTE:The House/Coach Battery Disconnect
switch must be ON while listening to the
dash radio, as the audio relay is powered
by house batteries. If the House/Coach
Battery Disconnect switch is OFF, the
speakers will not emit sound.
Radio Power Switch
(Located on lower dash area)
• Press HOUSE to listen to the radio while parked
without the ignition key on.
• Press ENGINE ("ENG") to listen while driving.
Further Information
See the manufacturer's user guide provided in
your InfoCase for complete operating
instructions.
RADIO IN-DASH/REARVIEW
MONITOR SYSTEM
–If Equipped
The radio in your coach can receive AM/FM
stereo stations. It also has a CD/DVD player for
your listening enjoyment through quality high-
output speakers located in several areas of the
coach.
DRIVING YOUR MOTORHOME
This system is also featured with a rearview
camera monitor system, which lets you see what
is directly behind your coach for safety and
maneuvering assistance. The viewing screen is
integrated into the dash.
The radio screen switches automatically when
the transmission is shifted into reverse.
NOTE: The camera polarity setting needs to be
set to "Battery" for automatic camera
viewing when the vehicle is put into
reverse. The "Camera Polarity" setting
is found under "Camera Settings" in the
system menu.
Basic Operating Instructions
• (1) LCD Screen.
• (2) +/- VOLUME - Press to set the volume.
• (3) DISPLAY - Press to turn the display on or
off.
• (4) TOP MENU - Press to switch the display
between the top menu screen and the current
source screen.
• (5) MODE or MUTE (depending on model)
- For MODE: Press to switch between the
Application screen and the AV operation
screen. Press and hold to switch to the camera
view mode. For MUTE: Press to switch the
mute setting to on or off.
• (6) TRACK - Performs manual seek tuning,
fast forward, reverse and track search
controls.
• (7) EJECT - Press to eject the CD/DVD.
• (8) RESET.
• (9) DISC LOADING SLOT
SECTION 3 –
3-9