Plastic Parts - Cleaning; Headlights And Exterior Lights - Winnebago Solei User Manual

Table of Contents

Advertisement

The front end mask must be thoroughly dry
before storing or reinstalling on the front of
the vehicle.
When reinstalling the mask, ensure both the
mask and the painted surface are free of debris
to avoid damage by abrasion.
Failure to follow recommendations will void
any paint warranty.
PLASTIC PARTS – CLEANING
Many parts in your vehicle, such as the dash,
exterior light lenses, and certain exterior body
panels are made of high-impact plastic materials
that can be damaged by wiping with solvents or
improper cleaning products.
Always try cleaning plastic parts with the
mildest cleaners first and work your way up to
stronger cleaning products. Use the following
cautionary lists as a guide when selecting
cleaning products to use on plastic parts.
NOTICE
Do not use citrus-based cleaners on
polycarbonate finishes. Citric compounds
will damage the high-gloss surface,
causing it to appear dull or "flat". Always
test a cleaning product on a hidden area
to be sure it will not cause damage to the
appearance of the part.
Here is a list of mild cleaners that may be used
safely:
Car washing soap and water
Glass cleaners without ammonia
Mineral oil
Multipurpose cleaners (such as Fantastik
®
Formula 409
, etc.)
The following products, compounds, or solvents
must be wiped off immediately to avoid
damage:
Ammonia
Brake fluid
MAINTENANCE AND STORAGE
Bathroom basin, tub, and tile cleaners
Chlorine
Ethyl alcohol
Isopropyl (rubbing) alcohol
Kerosene or gasoline
Naphthalene
Pine-type household cleaners
Do not use cleaners containing the following
products, compounds, or solvents. These
products will damage the finish.
Acetic acid
Acetone (nail polish remover)
Aromatic solvents (lacquer thinners)
Benzene
Butyl alcohol
HEADLIGHTS AND EXTERIOR
LIGHTS
Exterior Light Lenses
Most Winnebago Industries
polycarbonate lenses on exterior lamps, which
are very sensitive to a variety of chemical
solvents and cleaners.
Use only soap and water to clean exterior
lamp lenses - especially headlights.
Contact with certain chemicals can cause
etching, "crazing", or cracking of the lens,
which can significantly reduce the lens clarity
and effectiveness of the lamp and may require
replacement of the complete lamp housing.
Some popular citric acid cleaners may cause
bicarbonate lenses to become "hazy" or
"foggy".
Do not use a pressure washer to clean
headlights.
®
,
Inspect and operate the lights regularly to
confirm proper operation and mounting
condition.
Headlight Moisture
Your coach is equipped with composite
headlights, which contain replaceable halogen
"bulb" elements, common to most current
SECTION 11 –
®
vehicles have
11-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forza

Table of Contents