Winnebago Solei User Manual page 43

2. Disconnect air bed hoses from the pump
(located beneath the bed board).
• Remove air bed hoses
from pump
3. Route air bed hoses through the hole at the
head of the bed.
• Route Air Bed Hoses through hole at
the head of the bed.
4. Lower the bed board.
5. Remove mattress from the bed board and set
aside in another area of the coach.
6. Remove six screws (located on top of the
rearward bed board) and set aside.
• Remove six screws from
rearward bed board (three on
each side).
.
DRIVING YOUR MOTORHOME
7. Remove bed board and set aside in another
area of the coach.
8. Remove fasteners from metal engine cover
(rearward) and set aside to access engine.
9. Reverse steps to reinstall engine access cover
and bed board.
Model 38R
Forward Engine Access Cover (Beneath
rear bath floor)
1. Remove rear bath rug (if equipped) and set
aside.
2. Using the Engine Cover Latch Key (located
on your key ring), unlock the Engine Cover
Latch by turning counter-clockwise.
Engine Cover Latch Key
(Located on key ring)
Engine Cover
Latch
3. Using a Suction Cup Lift, remove unlocked
Forward Engine Access Cover and set aside.
NOTE: Use care when removing the Engine
Access Cover to avoid possible interior
damage.
SECTION 3 –
3-17