Fireplace - Winnebago Solei User Manual

SECTION 12 –
MISCELLANEOUS
Remote Operation
• ON-I/II
• TIMER
Fireplace Remote Control
(Located inside InfoCase)
• ON-I/II: Press ON-I/II button once for low
heat output. Press a second time for high heat
output. Press a third time for airflow without
heat.
• TIMER: Press ON-I/II button and select heat
output before setting the timer.
Press Timer button and select preset run time
(.5 hour, 1 hour, 2 hours, or 4 hours) shown on
the Indicator Panel (see following photo).
• FIRE: Press Fire button once to illuminate the
fire indicator (located on Indicator Panel) and
for the charcoal to begin burning. Press again
to diminish flame.
• OFF: Press once to turn Fireplace off.
Indicator Panel
• LOW / HIGH INDICATORS
• FIRE
INDICATOR
Indicator Panel
(Located behind front grill)
12-6
• FIRE
• OFF
• TIMER INDICATORS
Further Information
Refer to the Fireplace user guide provided in
your InfoCase for complete operating and
maintenance instructions, as well as safety
precautions.

FIREPLACE

–If Equipped
-Typical View
Basic Operation
NOTE: The fireplace can be operated by either
the remote control or the control panel.
Remote Operation
• Power
• Timer
• Backlight
Fireplace Remote Control
(Located inside InfoCase)
• Flame
• Heater