Hazard Warning Flashers - Winnebago Solei User Manual

SECTION 3 –
DRIVING YOUR MOTORHOME
This controlled back pressure helps to regulate
a vehicle's downhill speed, such as on
mountainous or hilly roads. It also provides
"braking" on level or near-level roads.
To use the Exhaust Brake
Exhaust Brake Switch
(Located on driver side trim panel)
-Typical View
• To Activate - Press and release the ON (up)
side of the switch. The exhaust brake will
operate whenever you let up on the throttle pedal
while the switch is ON.
• To De-activate - Press and release the OFF
(down) side of the switch to return to chassis
brakes alone.
WARNING
Do not activate the engine exhaust
braking system while on icy or extremely
wet roads or in any other situation where
abrupt deceleration could cause skidding
or loss of vehicle control.
Further Information
See your chassis manual in your InfoCase for
more instructions, information, and precautions
on using this feature.

HAZARD WARNING FLASHERS

The hazard warning flashers provide
additional safety when the vehicle must be
stopped on the side of the roadway and presents a
3-12
possible hazard to other motorists. When the
flashers are on, it serves as a warning to other
drivers.
Hazard Warning Flashers
(Typical View - your coach may differ
depending on model)
• Pull Silver Lever outward to activate Hazard
Flashers.
NOTE: Move multi-function lever up or down to
cancel.
Further Information
See the chassis manual in your InfoCase for
instructions on activating, operating, and
canceling hazard warning flashers.