Flex Bed - Winnebago Solei User Manual

Reverse steps to convert back into dinette
seating.
Once the table is up, engage the lock rod by
pushing the lock rod up.
WARNING
Failure to engage the lock rod when the
table is raised may result in injury.

FLEX BED

–If Equipped
(Typical View – Your coach may differ in
appearance)
Your coach may be equipped with the Flex
Bed System, which features a 12-Volt Powered
Bunk Bed and Dinette that can be converted into
additional sleeping space when needed.
NOTE: The Power Bunk Bed is not intended for
storage while the vehicle is in transit.
FURNITURE AND SOFTGOODS
Dinette to Bunk Beds
1. Lift the table top upward off the support tube
and set aside.
2. Pull the table leg tube from the floor or table
sockets and store beneath dinette seat.
3. Place the table top onto the ledge of the dinette
seat.
4. Place the back dinette cushions into place over
the table to complete the bed conversion.
SECTION 9 –
9-3