12. Save the Configuration
a. WS5000.(Cfg)> end
b. WS5000> save config example.cfg
6.1.5.2 GUI Configration t oset up a switch (EXAMPLE)
1. Log onto the switch with the proper User ID and Password.
Figure 6.18 Configuring Ethernet 2 as a trunk port
2. Highlight Ethernet 2, check the 802.1q Trunk, select the Primary VLAN then click Apply.
Note The Primary VLAN is dictated by the connecting wired switches port settings.
In this example the connected ports native VLAN is 4. The Primary VLAN will vary
based on your installation.
6-17
Configuring Policies