Logging In; Key Distribution Center - Symbol WS5000 Series System Reference Manual

4-2
WS5000 Series Switch System Reference Guide

4.1 Logging In

To log into the WS5000 Series Switch graphical user interface:
1. Open a compatible browser.
2. Connect to the WS5000 Series Switch by typing
GUI Login Page is displayed.
Note You must have Java Runtime version 1.4.2-06 (j2re-1_4_2_06-windows-i586-
p.exe) or greater running on the console machine, to access the WS5000 Series
Switch GUI. This file is included on the CD that ships with the product.
Figure 4.1 WS5000 Series Switch GUI Console Login
3. Type a User ID and Password and click the Login button. The default is "admin" and "symbol",
respectively.

4.2 Key Distribution Center

The WS5000 Series wireless switch has an on-board Key Distribution Center (KDC), or Kerberos authentication
server. Properly configured, the KDC provides a secure means for authenticating users/clients associated to a
WLAN or ESS with the Kerberos security policy applied. A separate switch with an on-board KDC can be
configured as a slave KDC to support the master KDC in case of a master KDC failure.
The KDC can use the system time or up to three Network Time Protocol servers (NTPs) when available.
Configuration of an NTP server in the KDC is optional, except in a master/slave configuration. When an NTP
server is configured for use, the KDC contacts the NTP server every 30 minutes to synchronize the system time.
When a slave KDC is present, use of an NTP server is recommended so the master and slave KDC times are
synchronized. Not using an NTP server in a master/slave configuration requires periodic, manual time
synchronization to propagate the master database to the slave KDC. This time synchronization step is not
necessary if the master and slave KDC times are within 5 minutes of each other.
https:// and the switch's IP address. The WS5000