Creating A Security Policy - Symbol WS5000 Series System Reference Manual

6-40
WS5000 Series Switch System Reference Guide
To see the configuration hierarchy while creating a Security Policy, click Where Am I? at any point. A Where
Am I? Dialog Box, such as Figure
Figure 6.59 Security Policy Where Am I? Dialog Box

6.2.1.1 Creating a Security Policy

To create a security policy:
1. From the WS5000 Series Switch GUI main window, select Create > Access Port > Security Policy.
The Security Policy Wizard appears.
Figure 6.60 Creating a Security Policy—Naming the Policy and Specifying an Encryption Type
2. Enter a name and description for the new Switch Policy.
3. Select one or more encryption methods for the Security Policy. The following are encryption options:
• None – No encryption. Any mobile unit that is set to "open" authentication is allowed to associate
with the system unless the adoption list specifically excludes it.
• WEP – 802.11 Wired Equivalent Privacy encryption. If using PSK, WEP must be configured by
choosing 40- or 128-bit encryption and supplying four keys.
• Keyguard MCM – KeyGuard encryption for TKIP (Temporal Key Integrity Protocol). This mode is only
supported by Symbol mobile devices. KeyGuard requires a 128-bit WEP key.
• TKIP – WPA1/WPA2 dynamic encryption. Wi-Fi Protected Access with Temporal Key Integrity
6.59, is displayed.