Executing The Downgrade Script - Symbol WS5000 Series System Reference Manual

Status : Transfer completed successfully
25608008 bytes received in 8.56 seconds (2990804 bytes/s)
SM-WS5000>

2.5.3.1 Executing the Downgrade Script

You have to execute the Downgrade.exe from the service mode. The example below explains how to
execute the Downgrade scipt.
SM-WS5000> exec
Executing CLI Service Mode command file ....
Enter the command file name: Downgrade.exe
Enter the Image Name: Downgrade1.4.0.0-xxxR.image
Verifying Image Checksum
Image Checksum: 60504983eac60093823e2c890ef0143b
Image Checksum Saved: 60504983eac60093823e2c890ef0143b
Image Checksum Verification Passed
Moving the Boot Loader !!!
Moving the Kernel !!!
Moving the Initrd !!!
Moving the Scripts !!!
GNU GRUB version 0.95
[ Minimal BASH-like line editing is supported.
word, TAB
lists possible command completions.
possible
completions of a device/filename. ]
grub> root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
grub> setup --stage2=/boot/grub/stage2 --prefix=/boot/grub (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... failed (this is
not fatal)
Running "embed /boot/grub/e2fs_stage1_5 (hd0,0)"... failed (this
is not fatal)
Running "install --stage2=/boot/grub/stage2 /boot/grub/stage1 hd0)
/boot/grub/stage2 p /boot/grub/menu.lst "... succeeded
Done.
grub> reboot
Creating License Tar File !!!
Rebooting
Rebooting the switch...
Shutting down dhcp daemon.. done
Shutting down apache server in the SSL mode...done.
Shutting down cell controller........ done
(640K lower / 3072K upper memory)
Anywhere else TAB lists the
2-17
Installing the System Image
For the first