Chapter 4. Using The Ws5000 Series Switch Gui; Logging In - Symbol WS5000 series Reference Manual

Using the WS5000 Series Switch GUI
Switch and access port configurations are accomplished through the use of a Graphical User Interface via a
Web browser, through SNMP commands, or the Command Line Interface (CLI) from a Telnet connection
(through the Wireless Switch console port, or a secure shell (SSH) application). However, not all areas of the
system can be configured solely by the GUI, CLI, or SNMP.
Where a specific system configuration is only accomplished through a specific interface, that information is
called out at the beginning of the configuration process. For CLI command reference, see to
Command Reference. See the following sections for details on using the WS5000 Series Switch GUI.

4.1 Logging In

To log into the WS5000 Series Switch graphical user interface, follow these steps:
1. Open a compatible browser.
2. Connect to the WS5000 Series Switch by typing
GUI Login Page is displayed.
and the switch's IP address. The WS5000
https://
4
Chapter 5, CLI