5-2
WS5000 Series Switch System Reference Guide
5.1 WS5000 as a RADIUS Client
The format of the Calling Station and the Called Station ID are changed, to confirm to the RFC-3580 (IEEE
802.1x RADIUS Usage Guidelines), as follows:
• The 6 byte MAC address now separated by an (-) hyphen when compared to the earlier separator used
(:) colon. An example for Calling Station ID would be – 00-10-A4-23-19-CO.
• The Called Station ID now has the SSID name suffixed to it using a colon (:). For example, the Called
Station ID for the MAC address of 00-10-A4-23-19-CO with an SSID of API would now be "00-10-A4-
23-19-CO:API".
5.2 Configuring an On-board RADIUS Server
The WS5000 Series Switch provides an integrated Radius server as well as the ability to work with external
Radius and LDAP servers to provide user database information and user authentication.
5.2.1 Configuring the Radius Server
The Radius Server screen allows the admin to set up data sources, as well as specify authentication
information for the built-in Radius server.
To configure the Radius server, select System Settings -> Radius -> Configuration.
Figure 5.1 System Settings
The following Radius Configuration screen appears: