Configuring The Radius Accounting Server - Symbol WS5000 Series System Reference Manual

5-10
WS5000 Series Switch System Reference Guide
2. Enter the following information in the Clients Configuration table:
In the Field
Subnet/Host
Netmask
Shared Secret
3. Use the Add button to add more entries into the Clients Configuration table. Use the Delete button
to remove entries.
4. Click one of the following buttons in the screen:
Apply
Undo
Cancel
Help

5.2.2.5 Configuring the Radius Accounting Server

The Radius accounting server enables a Network Access Server (NAS) to deliver accounting packets to the
Radius accounting server, which stores this information.
To configure the WS5000 Radius accounting server:
1. Click the Radius Accounting tab in the Radius Configuration screen.
The Radius accounting server screen (shown in
Enter
Name of the subnet or host to authenticate
The subnet mask number of the host to authenticate.
A shared secret used for each host or subnet authenticating with the Radius
server. The shared secret can be up to seven characters long.
Saves your changes
Closes the screen without saving your changes. This reverts the screen back
to the last saved configuration.
Exits the applet and terminate this session
Displays the online help.
Figure 5.9) appears.