Deleting Groups; Adding Users; Configuring Radius Proxy - Symbol WS5000 Series System Reference Manual

5-14
WS5000 Series Switch System Reference Guide

5.2.3.2 Deleting Groups

To remove a group, select the group from the table and click the Del (Delete) button. A warning message
displays when applying the change if there are users still assigned to the group. You can remove the group
from each user or add the group back to the group list.

5.2.3.3 Adding Users

The Users table displays the entire list of users. Up to 100 users can be entered. Users are listed in the order
they are added. Although users can be added and deleted, there is no capability to edit the name of a group.
1. To add a new user, click the Add button at the bottom of the Users area.
2. In the new line, type a User ID (username).
3. Click the Password table header. A small window displays. Enter a password for the user and click
OK to return to the Users screen.
4. Click the List of Groups table header. A new screen displays enabling you to associate groups with
a user. A user is required to belong to at least one group in order for the user to have access to the
switch.
• To add the user to a group, select the group from the list of groups (on the right) and click the Add
button.
• To remove the user from a group, select the group in the Assigned list (on the left) and click the
Del (Delete) button.
5. Click OK when you are done.
6. Click one of the following buttons in the screen:
Apply
Undo
Cancel
Help

5.2.4 Configuring Radius Proxy

The Radius server can proxy the authentication requests to a remote radius based on the suffix of the user id.
Figure 5.11 shows the Radius proxy configuration screen.
Saves your changes
Closes the screen without saving your changes. This reverts the screen back
to the last saved configuration.
Exits the applet and terminate this session
Displays the online help.