Configuring The Switch From The Default Configuration (Example) - Symbol WS5000 Series System Reference Manual

Hide thumbs Also See for WS5000 Series:

Table of Contents

WS5000 Series Switch System Reference Guide

Figure 6.16 Creating a Network Policy—Selecting an Input Policy

4. When done, click Next. A panel for selecting an Output Policy is displayed.

Output Policies define how to filter outgoing packets. Select an Output Policy, or to create a new Output

Policy, click Create... See

Figure 6.17 Creating a Network Policy—Selecting an Output Policy

5. When done, click Next. A Network Policy Created Successfully! message panel is displayed.

6. Click Finish to save the new Network Policy and exit the wizard.

6.1.5.1 Configuring the Switch from the Default Configuration (Example)

All of the steps below assume that the user is logged in to the WS5100/WS5000 series switch via the console

interface. The GUI may also be used (instructions are included later in this document).

1. Create a Spectralink Phone classifier (from the prompt WS5000.(Cfg)>)

a. WS5000.(Cfg)> ce

Creating a Network Output Policy on page 6-11

for more details.