Chapter 2. Installing The System Image; Before Installing The Image - Symbol WS5000 Series System Reference Manual

Hide thumbs Also See for WS5000 Series:

Table of Contents

This chapter describes how to install a new system image with the latest software on the WS5000 Series

Switch. It also guides you through the CLI commands for restoring the site configuration file for the switch.

This chapter contains:

Upgrading the Switch Software to 2.1

2.1 Before Installing the Image

Before upgrading the software on the WS5000 Series Switch, verify the current software version and update

path as described in the following section.

Symbol recommends you save the configuration of the system to be upgraded onto the network using the save

configuration command.

Installing the System Image