Configuring The Master Kdc To Recognize The Slave; Creating Kerberos User Accounts - Symbol WS5000 Series System Reference Manual

4.2.2.2 Configuring the Master KDC to Recognize the Slave

To configure the master KDC to recognize the slave KDC, follow these steps:
1. Complete the steps described in
1. Click System Settings > Kerberos > Configuration > Slave from the WS5000 Series Switch GUI
main window.
2. Select the slave KDC from the list in the left pane. Enter the hostname, IP address, and domain of
the master KDC server.
Figure 4.4 KDC Add Slave
3. Click Add to complete adding the slave to the master KDC. The KDC Add Slave dialog box appears.
Note Click the Synchronize Database button to force the Master KDC to push its
database to the selected slave (even though the database is automatically
synchronized whenever you make a change such as adding a KDC user).

4.2.3 Creating Kerberos User Accounts

A Kerberos user account is required for authentication on the WLAN. However, before a user account can be
added, the master KDC must be configured. See
details.
To create a Kerberos user account:
1. From the WS5000 Series Switch GUI main window, select System Settings > Kerberos >
Administration > Users. The Kerberos User Administration dialog box appears.
Using the WS5000 Series Switch GUI
Configuring the KDC Slave.
Configuring Master KDC Information on page 4-3
4-5
for more