Modifying An Access Control List - Symbol WS5000 Series System Reference Manual

Hide thumbs Also See for WS5000 Series:

Table of Contents

Figure 6.67 Creating an ACL—Defining ACL Rules

Configure the ACL rules per the control options described in

Table 6.10 Creating an ACL—Control Options within Rule Configuration Panel

Delete and Edit...

4. When done, click Next. An Access Control List Rule Created Successfully! message panel is

5. Click Finish to save the new Access Port Policy and exit the wizard.

6.2.2.2 Modifying an Access Control List

To modify an existing Access Control List:

1. From the WS5000 Series Switch GUI main window, select Modify > Access Port > Access Control

List. The system launches the Access Control List Manager.

To add a new rule, click the Add... button. In the panel that appears, fill in the

start MAC, end MAC, and action (type).

The Delete and Edit... buttons work on the currently selected rule to remove or

edit a rule, respectively.

ACL rules can be defined in a text file, and then uploaded to the switch using the

the Upload button.

The ACL file format contains one rule per line. The rule must follow this format:

action StartMac EndMac

action is either add (allow) or delete (deny)

StartMac and EndMac are normal six-duplet, colon-separated MAX addresses.

To specify a specific MU, exclude the end MAC.

To look for a specific MAC address among the rules defined, click Search... and

enter the address in the panel that appears (and click Find in the new panel). If

the MAC is affected by a rule, that rule is selected in the rule list.

Configuring Policies