Configuring Clients - Symbol WS5000 Series System Reference Manual

Group Name
Membership
Attribute
2. Click one of the following buttons:
Apply
Undo
Cancel
Help

5.2.2.4 Configuring Clients

To configure the WS5000 Radius client so that it can be accessed by external Radius servers:
1. Click the Clients Configuration
The Radius client configuration screen appears:
Figure 5.8 Client Configuration
Specify the name of the group sent to the LDAP server.
Specify the Group Member Attribute to be sent to the LDAP server when
authenticating users.
Saves your changes
Closes the screen without saving your changes. This reverts the screen back
to the last saved configuration.
Exits the applet and terminate this session
Displays the online help.
tab in the Radius Configuration screen.
Configuring User and Management Authenti-
5-9