10/100/1000 Port Status Led Codes; Software Overview - Symbol WS5000 Series System Reference Manual

Table 1.1 System Status LED Codes (Continued)
Event
POST failed (critical error)
Software initialization failed
a
Country code not configured
No access ports have been adopted
Primary inactive or failed
a. During first time setup, the LEDs will remain in this state until the country code is configured.

1.2.3 10/100/1000 Port Status LED Codes

A WS5000 Series Switch includes two indicators for the RJ-45 ports:
• Upper left (amber/green) for link rate
• Upper right (green) for link activity
Table 1.2 provides additional information about the status of the 10/100/1000 Port Status LED codes.
Table 1.2 10/100/1000 Port Status LED Codes
LED
Upper left Off
Green steady
Amber steady
Upper right Off
Green steady
Green blinking

1.3 Software Overview

This section provides an overview of the WS5000 Series Switch software and features. It contains:
• 1.3.1 Accessing and Configuring the Switch Software
• 1.3.2 Switch Policies on page 8
• 1.3.3 Access Port Adoption Process
• 1.3.4 Quality of Service
• 1.3.5 Multi-BSSID and ESSID Access Ports
• 1.3.6 Standby Management
• 1.3.7 WLAN to VLAN Mapping
Top LED
Red blinking
Amber solid
Amber solid
Blue blinking
Amber blinking
State
on page 9
on page 9
on page 13
on page 14
on page 14
WS5000 Series Switch Overview
Bottom LED
Red blinking
Off
Amber blinking
Amber blinking
Blue blinking
Meaning
10 Mbps link rate
100 Mbps link rate
1 Gigabit link rate
The port isn't linked
The port is linked
The port is linked and active
on page 8
1-7