5. Click Apply from the Rogue AP screen to save your changes to the Rule List and Rogue AP screens.
6. Click Cancel from the Rogue AP screen to cancel all updates to the Rogue AP and Rule List screens.
7.1.4 Examining Approved and Rogue Access Ports
Use the AP List screen to display information about each AP (rogue or valid) known to the switch. All approved
APs are listed in the upper table. All rogue APs are listed in the lower table. The AP List screen also allows the
administrator to create detection rules from the information collected about approved or rogue APs.
To display the AP List, select System Settings > Rogue AP Detection and click the AP List tab in the Rogue
AP Detection screen.
Figure 7.4 Access Port List Section
Add a selected AP to
the rule list
Configuring Rogue AP Detection
Select a row and click to view the
details of the selected Rogue AP
7-5