Using the WS5000 Series Switch GUI
You can configure the WS5000 switch and access ports using one of the following methods:
• The Graphical User Interface (GUI) through a web browser
• SNMP commands
• Command Line Interface (CLI) from a Telnet connection through the wireless switch console port or a
secure shell (SSH) application.
However, not all areas of the system can be configured solely by the GUI, CLI, or SNMP.
If you need to use a specific interface for a system configuration, this is specified at the beginning of the
configuration process. For information on using the CLI, see
Chapter 8, CLI Command
Reference.
4.1 Logging In
To log into the WS5000 Series Switch graphical user interface:
1. Open a compatible browser.