Camshaft - Husqvarna TC 450 Workshop Manual

ENGINE OVERHAULING

Camshaft

Check that cam surfaces are scored, stepped, grooved etc. Insert the camshaft
between two references and then check deviation using two comparators.
Wear limit: 0.0039 in.
Check that the cams are in good conditions, without wear or deformation.
Cam height "H"
INTAKE (new) = 36,57 mm/ 1.440 in. (450-510); 36,69mm /1.444 in. (310)
EXHAUST (new) = 35,94 mm/ 1.415 in. (450-510) and (310)
A
INTAKE
:
B
EXHAUST
:
INTAKE
A)
EXHAUST
B)
Part. N. 8000 H1344 (10-2009) G.9