Removing The Front Fork - Husqvarna TC 450 Workshop Manual

Hide thumbs Also See for TC 450:

Table of Contents

FRONT SUSPENSION

Removing the front fork

Take note of measure "A" which must be restored when reassembling. Set a sup-

port under the engine to lift the front wheel from the ground, working as follows:

-remove,on the L.H. side, the screws (1) , the brake hose and the instrument

cable clamp (TE-SMR) on the fork tube guard;

- remove the six screws (2) and the fork tube guards;

- remove the brake caliper from the L.H. fork tube by unscrewing the two fasten-

ing screws (3);

- remove the front wheel following the instructions on page Y.6;

- unloose the screws (4) fastening each fork slider to the steering head and

steering base;

Part. N. 8000 H1344 (10-2009)

Show Quick Links

Table of Contents