Husqvarna TC 450 Workshop Manual page 366

Hide thumbs Also See for TC 450:

Table of Contents

"KIT" ASSEMBLING INSTRUCTIONS

When turn the ignition key in position IGNITION, for the first 2

seconds, the

instrument shows the version of the checking SW; after the check, the instrument

shows ALWAYS the map SEL 1.

The switching to SEL 2 is possible with ENGINE ON, pushing the "dual

mode" button for 1 second, with a water temperature of approx. 40 ° C / 104 °

F and approx. 10 seconds after the engine start. In the absence of these con-

ditions, the switching will not be made. From SEL 2, pushing the "dual mode"

button for 1 second, SEL 1 is selected again, and so on.

SEL 1: MAP FOR DRY GROUND

SEL 2: MAP FOR WET GROUND

Part. N. 8000 H1344 (10-2009)

Show Quick Links

Chapters

Table of Contents