Husqvarna TC 450 Workshop Manual page 238

Hide thumbs Also See for TC 450:

Table of Contents

FRONT SUSPENSION

Assemble the collar bushing, the O-ring, the spring guide and the nut on the

Insert the inner push rod into the piston rod.

Make sure that the inner push rod protrudes at least 18mm (0.71in.) from the

Refilling with oil.

Measure the specific quantity of oil prescribed.

Refill the shock absorber unit with the specific quantity of oil.

Move the piston rod slowly up and down to evenly distribute the oil in the entire

N.B.: If, during assembly, the oil has not been completely drained from the

shock absorber unit, refill with oil following the procedure below (Refilling to the

specific level).

Part. N. 8000 H1344 (10-2009)

Show Quick Links

Chapters

Table of Contents