Combining Two Tracks (Track Combine) - Kenwood HM-382MD Instruction Manual

Combining two tracks
Combines two adjacent tracks into a single track.
After this operation, the track numbers of tracks
located after the combined tracks are decreased
automatically.
Perform the operations in the following procedure while the display is blinking.
1
Select "COMBINE".
1 Press the TRACK EDIT key.
2 Select "COMBINE".
3 Set it.
(If you combine tracks during play-
back, go to step 3.)
2
Select the track to be combined.
1 Select the track number.
To decrease
track No.
2 Set it.
3
Execute the track combine operation.
4
After editing, eject and remove the mini
disc.
(TRACK COMBINE)
TRACK EDIT
P.CALL
SET
To increase
track No.
P.CALL
SET
ENTER
Always eject the MD after title entry or editing.
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
"COMBINE" cannot be selected if the track be-
ing played is the first track on the disc.
÷ To abort "COMBINE" in the middle, press the TRACK
EDIT key.
Each press switches the operation.
When pressed
in stop mode
1 MOVE
2
COMBINE
3 ERASE
When pressed in stop mode
COMBINE
0 01+0023
÷ To combine two tracks during playback, press the TRACK
EDIT key while the second track is being played.
COMBINE
0 03+0043
2 3 4
1
A B C D
2 3
1
A B C+D
Track No. and title of the first track are left.
(Track No. and title of the second track are cleared.)
COMPLETE
MD Edit Functions
When pressed
in play mode
1 DIVIDE
2
COMBINE
3 ERASE
4 MOVE
?
?
5 6
E F
4 5
E F
49