Controls And Indicators; Display - Kenwood HM-382MD Instruction Manual

Controls and indicators

Display

1 Indication related to CD/MD
2 MUTE indicator
3 SLEEP indicator
4 RDS indicator (except for some areas)
5 Auto Power Save indicator
6 Selected selector indicator
7 O.T.E. (ONE TOUCH EDIT) indication
Appears during one-touch recording.
8 Reverse mode and TAPE equalizer (TAPE EQ.) indi-
cators
Display panel control
Controlling the BACK LIGHT
The brightness of the main unit display can be ad-
justed.
1 Turn power ON and press the menu key.
2 Rotate the volume/multi control knob to
select "BACK LIGHT?" and press the set/
demo key.
volume/
multi control
up
down
3 Rotate the volume/multi control knob to
select the desired light brightness ("High" or
"Low") and press the set/demo key.
volume/
multi control
up
down
÷ When the SLEEP timer has been set, the light is "Low"
regardless of the BACK LIGHT setting.
( The displays given in this manual are approximations only.
They may differ from what actually appears on the display.)
1 2 3 4
6 7
menu
set/demo
set/demo
5
8 9 0
9 Timer-related indicators
0 Tuner-related indicators
! EX.BASS indication
@ LOUD (Loudness) indication
# Character information display section
Shows character information including the input selection,
volume level and disc/track title. Frequency indication, time
indication, track No., program No., etc.
AUTO POWER SAVE function
When the unit is ON and the unit is left for 30 min-
utes with CD, MD and TAPE not operating, the unit
is switched off automatically by this function. This
is convenient when you forgot to switch off the unit.
This function can be activated or deactivated by the
following operation.
1 Select "A.P.S. SET?".
menu
(Press the set/demo key while the "?" mark is
blinking.)
2 Select.
volume/
multi control
up
3 Set it.
÷ When the TUNER or AUX input is selected, APS
operates only when the volume is set to zero or when
MUTE is on.
!
@
#
volume/
multi control
up
down
down
set/demo
9