Combining Two Tracks (Track Combine) - Kenwood XD-980MD Instruction Manual

Combining two tracks
Use the following procedure to combine two tracks into
one by deleting a track number. This operation allows to
connect several tracks or a piece of music divided into sev-
eral parts. After this operation, the track numbers of tracks
located after the combined tracks are decreased automati-
cally.
1
Select "COMBINE".
1Select "COMBINE".
2Set it.
If you combine tracks during playback,
go to step 3.
2
Select the track to be combined.
1 Select the track number.
To decrease
track No.
2 Set it.
3
Execute the track combine operation.
4
After editing, eject and remove the mini disc.
(TRACK COMBINE)
Each press switches the operation.
When pressed in stop mode:
TRACK EDIT
When pressed in play mode:
To increase
track No.
The names in brackets in the explanations are the names of the
remote control keys.
"COMBINE" cannot be selected if the track being played is the
first track on the disc.
1 MOVE ?
(Moving a single track)
2 COMBINE ?
(Combining tracks)
3 ALL ERASE ?
(Erasing of all tracks)
4 Editing cancelled
- - - +
@
1 DIVIDE ?
(Dividing a track)
2 COMBINE ?
(Combining tracks)
3 ERASE ?
(Erasing one track)
4 Editing cancelled
0 0 2 +
@
To combine two tracks during playback, press the TRACK EDIT
(TRACK EDIT/CHARA.) key while the second track is being
played. (The track being played and the track immediately before
it will be combined.)
If the operation is started during playback, it pauses automatically.
Editing is aborted if no operation has been performed for 8 seconds.
Should be approx. 2 sec. or longer.
1 2 3
A B
1 2
A B
Track No. and title of the first Track No. and title of the second
track are left. track are cleared.
Connecting tracks 2 and 3.
0 0 2 +
@
C O M P L E T E
If editing has been started during playback, playback restarts
automatically from the current track.
"WRITING" displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
MD Edit Functions
XD-980MD (En)
- - - ? L
30 10 5 3 1
R
0 0 3 ? L
30 10 5 3 1
R
4
C D
3
Track No. is
D adjusted.
0 0 3
? L
30 10 5 3 1
R
! L
30 10 5 3 1
R
5 9
( dB)
0
( dB)
0
( dB)
0
0 ( dB)