Recording On Tape - Kenwood HM-382MD Instruction Manual

Recording on TAPE

30
TAPE
0
1 1
TAPE
2 3
2
Stop the recording
Pause the recording
1. Load a tape in deck.
1 Press the TAPE0 key
2 Insert a tape.
3 Press the TAPE0 key
÷ Differentiation between normal (TYPE ) and high (TYPE
automatically.
÷ Remove tape slack before loading.
2. Select the tape transport direction.
To reverse the transport direction
1 Press the play key.
2 Press the play key again.
3 Stop playback.
÷ When recording is started, the tape is transported in the direction selected in this
2
step.
Check the tape transport direction indicator.
÷ Wind the tape to the position where recording is to be started.
1 1
5 5
4 4 2 2
3 3
3 3
Stop the recording
) tape is set
™