Collective Presetting Of Stations (Auto Preset); Channel Space Setting - Kenwood HM-382MD Instruction Manual

26
Collective presetting of stations
AUTO MEMORY ............... For U.K. and Europe
AUTO PRESET .................. Other countries
1 Receive a broadcast.
2 Select "A.MEMORY ?"
(or "AUTO PRESET").
menu
set/demo

Channel space setting

the United Kingdom )
(Except for
The space between radio channels has been set to the one
that prevails in the area to which the system is shipped.
However, if the current channel space setting does not
match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in
the following table or vice versa, proper reception of AM/FM
broadcasts cannot be expected. In this case, change the
channel space setting in accordance with your area by
referring to the following table.
Area
USA, Canada and South
1
American countries
2 Other countries
TUNER/band
volume/
multi control
up
down
CHANNEL
Space Frequency
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
FM
T
÷ A maximum of 40 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use "One-by-one
preset
presetting (manual
1 Turn power on.
2 Press the TUNER/band key.
3 Press the 7STOP key. (for more than 5 seconds)
4 Select the mode by using the 7STOP key.
Each press switches the space frequency alternately.
1 "FM
50 kHz" (FM 50 kHz, AM 9 kHz)
2 "FM 100 kHz" (FM 100 kHz, AM 10 kHz)
Blinks.
5 Establish the selection by pressing the set/
demo key.
Receiving broadcast station
AUTO TUNED
87.50MHz
UNER P-- E
)".
W