Kenwood HM-382MD Instruction Manual page 15

Listening through headphones
Insert the headphone plug into the "phones"
jack.
phones
÷ Headphones with a stereo mini plug can be con-
nected.
÷ The sounds from all speakers are cut off.
Muting the sound temporarily
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is changed.
Standby mode
While the standby/timer indicator of the unit is lit
in red or amber, a small amount of current flows to
back up the memory. This condition is called standby
mode.
C
When CD has been selected.
V
Volume display
(Remote control unit only)
MUTE
01 0:00
D
01 0:12
OLUME
2
Bass and treble compensation
Each press switches the modes as follows.
1 "EX.BASS" lights.
The lowest and highest frequencies are en-
hanced regardless of the current volume
level.
2 "LOUD" (Loudness) lights.
The lowest and highest frequencies are en-
hanced according to the current volume level.
(Effective during low-volume listening.)
3 Both indicators off.
Canceled.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound
enhancement mode.
0
Basic use method
sound
U
15