Kenwood HM-382MD Instruction Manual page 62

62
3
Set the ON time then the OFF time.
1
Adjust the time.
The time is
returned.
2
Set it.
4
Make the desired reservation.
For timer playback or AI timer playback
volume/
multi control
up
set/demo
1
PLAY .......... Timer play
2 REC
3
AI PLAY ..... Timer play with gradu-
volume/
multi control
up
set/demo
1 TUNER ...... Broadcasts
2 CD
3 MD
4 TAPE
5 AUX ........... External input (video, etc.)
÷ To select AUX, rotate the volume/multi control knob
counterclockwise.
volume/
multi control
up
set/demo
÷ When the timer setting is completed by pressing the
set/demo key, "COMPLETE" is displayed.
÷ The source is played back at the volume set the last
time the power was turned off.
volume/
multi control
up
The time is
advanced.
set/demo
1 Select the mode.
(1) Select "PLAY" or "AI
PLAY".
(2) Enter it.
ally increasing volume
2 Select the input source.
(1) Select the source to be
played.
(2) Enter it.
3 Select the broadcast sta-
tion (only when TUNER
is selected above).
(1) Select the preset sta-
tion No.
(2) Enter it.
PROG.
1
ON TIME
7:00 m a
÷ For each of the ON time and OFF time, enter the figure
of "hour" by performing steps 1 and 2 then enter the
figure of "minute" in the same manner.
÷ If you make a mistake, press the menu key and restart
from step 3.
For timer recording
volume/
multi control
up
set/demo
volume/
multi control
up
set/demo
volume/
multi control
up
set/demo
volume/
multi control
up
set/demo
÷ When the timer setting is completed by pressing the
set/demo key, "COMPLETE" is displayed.
÷ The sound is muted during timer recording. If you want
to monitor the recorded sound, turn the volume/multi
control knob (or press the volume key on the remote)
to adjust the volume.
Timer operation
PROG. 1
OFF TIME
8:00 m
1 Select the mode.
(1) Select "REC".
1 PLAY
2
REC
3 AI PLAY
(2) Enter it.
2 Select the input source.
(1) Select what is to be
recorded.
1 TUNER
..... Broadcasts
2 AUX
.... External input
(2) Enter it.
3 Select the broadcast sta-
tion (only when TUNER
is selected above).
(1) Select the preset station
No.
(2) Enter it.
4 Select the broadcast sta-
tion (only when TUNER
is selected above).
(1) Select.
1 MD
2 TAPE
(2) Enter it.
a