Combining Two Tracks (Combine) - Kenwood HM-DV6MD Instruction Manual

76
Combining two tracks
Combines two adjacent tracks into a single track. After this operation, the track numbers of tracks located
after the combined tracks are decreased automatically.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Select the "MD" input ⁄
1
Select " COMBINE".
1
Press the TRACK EDIT key.
2
Select "COMBINE".
4
P.CALL
3
Set it.
(If you combine tracks during playback,
go to step 3.)
2
Select the track to be combined.
1
Select a track number.
4
P.CALL
To decrease
track No.
2
Set it.
(COMBINE)
TRACK EDIT
¢
SET
¢
To increase
track No.
SET
It is not permitted to combine two tracks which are
recorded in different recording modes.
÷ To combine two tracks during playback, press the TRACK
EDIT key while the second track is being played.
÷ To cancel the operation in the middle, press the TRACK
EDIT key any time before step
Each press of the 4 or ¢ keys switches the op-
eration.
When pressed in
stop mode
1 "MOVE"
2 "COMBINE"
3 "ERASE"
÷ "COMBINE" cannot be selected if the track being
played is the first track on the disc.
C O M B I N E
0 0 1 + 0 0 2
Connecting tracks 6 and 7.
0 0 6 + 0 0 7
MD Edit Functions
3
.
When pressed in play
mode
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
?
?