Combining Tracks (Combine) - Kenwood HD-5MD Instruction Manual

56

Combining tracks (COMBINE)

Two tracks can be combined to one track. It is possible to combine several tracks or a track with fine sub-
divisions. After tracks have been combined, all track numbers will be renumbered consecutively.
As long as the tracks are next to each other, they can be combined even when they belong to different
groups. The combined track is registered to the group of the first part.
Image for combining tracks
Combining the fourth and the first track
Perform the operation after the display of
"GROUP" and "PGM" has been extinguished.
Remote control unit only
1 Press the "TRACK EDIT" key
while playing the track to be at
the beginning after combining.
2 Press the 4P.CALL¢ keys re-
peatedly to select "COMBINE ?".
2 Press the "SET" key.
1 2 3
A B C
3
1 2
B C
The track number and the title of
the first half remain.
TRACK EDIT
4 ¢
P.CALL
SET
4 5
D E
4
D A E
The track number and the name of the
last half are lost.
÷ When the editing is to be abandoned, press
the "TRACK EDIT" key to stop the editing and
to return to the original condition.
÷ When an item which cannot be edited is se-
lected, an
of the display.
÷ The unit will pause in MD edit mode.
Return to the original status is made when no opera-
tion is performed within 20 seconds.
MD Edit Functions
6
F
5
The track numbers
F
are adjusted.
will be shown at the beginning
Continued on next page
HD-5MD/EN
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL