Kenwood HM-382MD Instruction Manual page 52

52
2
Input the title.
Characters can be selected either in the "charac-
ter input key mode" or "skip key mode".
To enter a character using the charac-
ter input keys (Character input key
mode):
If "Aa" or "12" is displayed, press any character input
key.
1 Press the DISPLAY/CHARAC. key repeat-
edly to select a character group.
2 Select the first character by pressing a
character input key.
÷
Pressing a key more than once changes the
character input with it.
(Example: When the ABC key is pressed)
Each press changes the character which can be
input.
A = B = C = a = b = c.
÷ Press the 1 or ¡ key to move the input
location (cursor) to the left or right.
÷ If you made a mistake, press the CLEAR/
DELETE key to delete the incorrect charac-
ter.
3 Press the SET key to set the character.
(Repeat steps 1 to 3 for each character to be
entered.)
Title editing character list
The following uppercase and lowercase alphabets and symbols can be used in title editing.
Group
"Aa"
Key
space [1] [2] [3]
1
ABCabc
2 ABC
DEFdef
3 DEF
4 GHI GHIghi
5 JKL JKLjkl
MNOmno
6 MNO
PRSprs
7 PRS
8 TUV TUVtuv
9 WXY WXYwxy
QZqz
0 QZ
' , : ? ! ; . " _ ` $ space
+10 ' , :
& ( ) - / + * = < > # % @
+100 &( )-
TIME/SPACE space
÷ The first alphabet which appears when a character input key is pressed may sometimes be an uppercase or sometimes
a lowercase letter depending on each occasion.
DISPLAY
/CHARAC.
SET
The character group which can be used in the "char-
acter input key mode" are as follows.
"Aa" group
A to z, symbols plug title memos ([1], [2], [3])
"12" group
0 to 9 and symbols.
In case of disc title
Aa
M u
The cursor moves and waits for input of the next
character.
" "
1
2
3
4
5
6
7
8
9
0
MD Edit Functions
s ic