Listening To An Aux Input Source; Adjusting The Aux Input Level - Kenwood HM-382MD Instruction Manual

Listening to an AUX input source

58
Listening to an AUX input source
1
Select AUX (external input).
2
Play the connected equipment..
3
Adjust the volume.

Adjusting the AUX Input Level

This adjusts the input level for the external equip-
ment (video deck etc.) connected to the AUX in-
put terminal. Adjust so that the volume of the
AUX input source sounds at an equivalent level
to the CD or MD. (Main unit operation only)
1 Select "AUX INPUT ?"
set/demo
2 Adjust the input level.
The level
decreases.
3 Set it
AUX
volume/
multi control
up
down
menu
volume/
multi control
up
down
volume/
multi control
up
The level
down
increases.
set/demo
Turning the knob switches the display contents.
TAPE RVS.
REC MODE
AUX INPUT
BALANCE
BACK LIGHT
A.P.S. SET
TIMER SET
A U X
L EVEL
÷ Adjust the input level while "AUX INPUT" is displayed.
÷ Adjustment is possible over the range from -4 to +3.
÷ Adjusting the input level control also varies the recording
level from the input source connected to the AUX input
jacks.
?
?
?
?
?
?
?
N P U T
I
+ 2