Playback Of Tape - Kenwood HM-382MD Instruction Manual

Playback of tape

22
Selection of TAPE EQ.
Start playback
TAPE
0
1 1
Transport direction indicators
TAPE
2 3
2 2
To wind tape at high speed
To wind tape at high
speed
1 1
To stop playback
1. Load a cassette tape.
1 Press the TAPE 0 key.
2 Insert a tape.
3 Press the TAPE 0 key.
2. Start playback.
During playback, the tape running direction changes each time the
key is pressed.
Transport direction indicators
Indicates the tape transport direction during playback or recording by
lighting of 2 or 3. This direction is the direction stored in memory when
the tape was last stopped.
If you load a tape in the cassette deck in advance while
the power is off. pressing the TAPE23 key turns power
on automatically and starts the tape playback.
2 2
Start playback
Selection of reverse mode
To stop playback