System Connection; Connection Of The System Accessories - Kenwood HM-382MD Instruction Manual

System connection

6

Connection of the System Accessories

This figure shows the method of connection be-
tween the main unit and provided accessories.
AM loop antenna
The supplied antenna is for indoor use. Place it as far as pos-
sible from the main system, TV set, speaker cords and power
cord, and set it to a direction which provides the best recep-
tion.
1 2
Notes Notes
1.Never short-circuit the "+" and "-" speaker cords.
2.If the "+" and "-" polarity are inverted, the sound will be unnatural
with unclear positioning of musical instruments, etc.
3.Be sure to insert all connection cords securely. If their connections
are imperfect, the sound may not be produced or noise may
interfere.
4.Before plugging or unplugging a connection cord, be sure to unplug
the power cord from the wall AC outlet. If connection cords are
plugged or unplugged with the power cord left plugged in, malfunc-
tion or damage may result.
Main Unit
1 2
3 4
3
CAUTION
Note on Connection
Connect the components as shown in the dia-
gram.
Only plug the power cord into a power outlet
once connections are completed.
Malfunction of microcomputer
If operation is not possible or erroneous dis-
play appears even though all connections have
been made properly, reset the microcomputer
referring to "In case of difficulty".
AM loop antenna
Speaker (Right)
¨