Changing Or Deleting A Title; Erasing All Titles - Kenwood HM-382MD Instruction Manual

54
3
Executing title input
1 Press the ENTER key to set the title input.
÷ If power is switched off (to STANDBY mode)
or the TITLE INPUT key is pressed to cancel
setting before the ENTER key is pressed
here, the inputs made until then will be cleared.
2 Press the TITLE INPUT key to exit from
editing.
3 Press the 0 MD key and eject the MD.

Changing or deleting a title

1 Perform step 1 in "Assigning a title to a
disc or track" to select the disc title or
track title to be changed or erased.
2 Press the 1 or ¡ key to place the
cursor on the character to be modified or
erased.
÷ If it is required to insert a character, place the
cursor on the character immediately before the
desired insertion location.
3 Press the CLEAR/DELETE key to delete
the character. (If you are erasing the title,
go to step 5.)
4 If you are changing the title, perform step
2 in "Assigning a title to a disc or track".
5 Perform step 3 in "Assigning a title to a
disc or track".
ENTER
TITLE
INPUT
0
MD
÷ When the ENTER key is pressed , the selection of the
next title (disc title or track title) to be edited can be
restarted. To continue editing of another title, repeat the
above procedure from step 1-2.
DISC
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.

Erasing all titles

1 Select the MD input and press the TITLE
INPUT key.
2 Press the 4 or ¢ key repeatedly to
select "ALL ERASE".
3 Press the SET key to set the "ALL ERASE"
selection.
4 Press the ENTER key to erase all titles.
÷ All of the disc and track titles are erased.
5 Press the TITLE INPUT key to exit from
editing.
6 Press the 0 MD key and eject the MD.
MD Edit Functions
S TORE
..