Combining Tracks - Kenwood MDX-01 Instruction Manual

Combining tracks

Use the following procedure to combine two
track into a single track. The track numbers
after the combined tracks are adjusted au-
tomatically.
IImage of combining tracks
A B C
A B
100 0
& ()
QZ
SPACE CHARAC. /DELETE
P.CALL
4
SET
ENTER
TUNING
DOWN
CD /
ENTER
REPEAT MD /
AUTO/MANU.
RANDOM
SOUND SLEEP
TONE
VOLUME
RC-MDX0001
Remote control only
1
Select the MD input and in-
sert a recordable MD.
2
Press the 4 or ¢ key re-
peatedly to select the earlier
track number to be com-
bined.
The track will be played back.
D E F
C D E
POWER
/
TITLE SEARCH
TITLE INPUT
TRACK EDIT
10
TRACK EDIT
:
CLEAR
PGM
SET
¢
TUNING
UP
FM/AM
STOP MD O.T.E.
DISPLAY
TIMER TIME DISPLAY
3
Press the TRACK EDIT key re-
peatedly until "3 COMBINE
?" is displayed, then press the
SET key.
Track No. selected in step 2
If "X COMBINE" is displayed, the subsequent
operation will not be available (see page 53).
4
Press the 4 or ¢ key re-
peatedly to select the later
track number to be com-
bined.
Display when combining track Nos. 13 and 17
5
Press the SET key.
6
Press the ENTER key.
7
Eject the MD.
"WRITING" is displayed.
To cancel the COMBINE operation in
the middle:
Press the TRACK EDIT key any time before
the end of step 5.
Editing can be canceled provided that it is at-
tempted before "WRITING" is displayed. For the
procedure, see "Canceling editing" (page 44).
÷ Be careful not to apply vibration to the unit while
"WRITING" is displayed, because the MD recorder is
writing recorded and edited data in the MD in this period.
Also, to avoid loss of recorded and edited data, do not
unplug the power cord before "WRITING" disappears.
Blinks
39
EN