Casio DT-X11M10E Quick Start Manual page 8

Power
Operation
Memory backup
Operating period (in
hours)
Memory back up period
Memory backup battery
charge period
Buzzer
Notes:
1. A font that can be used to print characters of any size.
2. Concurrent use of WLAN communication with Bluetooth communication is not recommended.
3. Based on the operating cyclic ratio of "standby:calculation:scan" at 20:1:1
4. Based on the operating cyclic ratio of "standby:scan:wireless" at 6.5:1.5:2.
5. Dead Pixels
The LCD panel employed in this product uses high precision and substantial number of
components which commonly cause a small number of the pixels not to light or to remain lit all
the time. This is due to the characteristics of LCD panel yield in accuracy over 99.99% and
permissible.
Lithium-ion battery pack
Lithium battery (rechargeable) on board
DT-X11M10E/M30E/M30U
Approx. 8 (with HA-A20BAT)
Approx. 18 (with DT-5025LBAT)
RAM : Approx. 10 minutes,
Clock : Approx. 2 weeks
Approximately 4 days
Sound pressure 70dB (minimum)
8
HA-A20BAT or DT-5025LBAT
Built-in, not replaceable 50mAH
DT-X11M10RC/30RC
*3
Approx. 4 (with HA-A20BAT)
*3
Approx. 10 (with DT-5025LBAT)
- Lithium battery pack is fully charged.
- At room temperature.
- Time period until when the battery is
fully charged.
- Battery pack is being installed.
- At room temperature.
*4
*4