Casio DT-X11M10E Quick Start Manual page 30

Establish Connection with Your PC
1. Choose PC Connection icon in the Control Panel on the DT-X11.
2. Set PC Connection to IrDA. If it is not IrDA, tap Change Connection... button in PC
Connection tab (see Figure 5.4) and choose IrDA in the pull-down menu box in the window in
Figure 5.4. Tap OK button twice.
Figure 5.4
3. On the PC, make sure Allow serial cable or infrared connection to this COM port has
been set effect and Infrared Port [IR] is chosen in the pull-down menu box (see Figure 5.5).
Figure 5.5
4. Place the IrDA port located on the bottom side of the DT-X11 facing to the IrDA port on the PC
directly. Communication can be established if the distance is within zero to one meter. The
maximum distance is 30cm when communicating at 4 Mbps.
5. From Start menu, navigate to Programs → Communication → ActiveSync and then start
up ActiveSync.
30