Casio DT-X11M10E Quick Start Manual page 36

Establish Connection with Your PC
1. Choose PC Connection icon in the Control Panel on the DT-X11.
2. Set PC Connection to USB. If it is not USB, tap Change Connection... button and choose
USB in the pull-down menu box in the window in Figure 5.18. Tap OK button twice.
Figure 5.18
3. On the PC, make sure Allow USB connection with this desktop computer. has been set
enabled (see Figure 5.19).
Figure 5.19
4. From Start menu, navigate to Programs → Communication → ActiveSync and then start
up ActiveSync.
Establish Partnership
For establishing the partnership, see the procedure Establish Partnership in Chapter 5.2.1 "Via
Direct IrDA" on page 31.
36