Casio DT-X11M10E Quick Start Manual page 44

Establish Connection to Your PC
1. On the PC, make sure Allow network [Ethernet] and Remote Access Service [RAS]
server connection with this desktop computer. has been set enabled (see Figure 5.33).
Figure 5.33
2. On the DT-X11, navigate to Start → Programs → Communication → LAN ActiveSync
to initiate the connection.
3. Ensure that Network Connection is the name of the connection method and that Connect to
line is the name of your PC.
4. Tap Connect ... button and then the connection should be established.
44