5.2.4 Through Bridge Satellite Cradle via RS-232C
In order to communicate through the Bridge Satellite Cradle (DT-160IOE) via RS-232C, you will
need to install the IrXpress Serial Driver on your PC.
Install ActiveSync to Your PC
If you have already installed ActiveSync 3.8, you may skip this step. For detailed explanation on
installing ActiveSync, see the procedure Install ActiveSync to Your PC in Chapter 5.2.1 "Via
Direct IrDA" on page 28.
Install IrXpress Serial Driver to Your PC
1. Initiate the IRXpressSerialIrDA.exe. Specify the folder in where the file is saved, and then click
Next > button.
2. Click Next > button.